The speed of a computer device also influenced from the hard drive being used, therefore the selection of the hard disk also needs to be taken into account if you want to have a super fast computer. Differences on the Sata and Scsi can have an effect on the speed of your computer, is that true? Instead of continuing to ask, we will be featuring an article that explains the fundamental difference from the Sata and Scsi.
Sata (Serial Advanced Technology Attachment) is a computer are usually for transferring data between a motherboard as well as data storage media, such as hard disk and the optical drive to the computer. Absolute advantage wearing the Sata hard disk is faster data transfer, can move or improve your smartphone while operating a thinner cable, so the air cooling process can be streamlined, as well as some other advantages. Sata in transferring data by means of sequential aka serial cord passing and also by means of the technique of composing own SATA disk that is connected to the motherboard in the system in the absence of a master or slave, so SATA cable can only be used on a single hard disk. 4 main functions i.e. Sata cable connecting Hard disk drives to the Motherboard, connect the Optical disc drives to the Motherboard, connect the Hard Disk Drive to another Hard Disk Drive, and connect the Sata ports on your Hard Disk Drive to the USB port.
Small Computer System Interface (SCSI) is a set of standards for physically connecting and transferring Data between computers and peripherals. Scsi command Protocol defines the (computer) and electricity and optics interface. Scsi is most commonly used for hard disks, but can connect a wide range of other devices, including scanners and CD drive. Any devices attached to the Scsi bus of the computer in the same way, accounting for up to 8 or 16 devices can be attached to a single computer bus. Scsi devices, particularly hard drives, designed for use in addressing the needs of server market. For this reason, Scsi usually made with higher standards and better warranty from an IDE drive with a capacity of a classmate. However, the added speed and quality is directly proportional to its price. Scsi components is significantly more expensive than their cousins.
Sata Vs Scsi
|Key Features||- MOTHERBOARD MATE SATA III cable is specifically designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives - BLAZING FAST SATA III SPEEDS up to 6 Gbps deliver superior performance for a custom gaming or RAID configuration; Provides secure connections for fast and reliable file transfers; Backwards compatible with SATA I, II, III hard drives||- Centronics 50-Pin Male Designed with a foil and braided shield overwrapping a twisted-pair construction - High quality wire that provides data integrity and maximum immunity to EMI/RFI interference - Molded connectors provide strain relief and add additional protection against EMI/RFI|
|Customer Rating||4.6 out of 5.0 stars||4.8 out of 5.0 stars|
|Best Offer||Save Money Please click here||Save Money Please click here|
NOTE : Product prices, availability, ratings and save money information are accurate as of the date/time indicated on post time (as seen right bellow the tittle) and are subject to change. Any price, ratings, availability and save money information displayed on Amazon Site at the time of purchase will apply to the purchase of this product.
We think that Sata and Scsi are commonly different to each other although the functions are overall for the speed of a computer. Both Sata and Scsi are used in different part and situation according to our needs. Things that make them similar is just about the functions and performance which is acting as a connector.